SG Group 1000i Instrucciones De Uso página 61

2 Once the fuel tank is
empty open
maintenance cover.
3 Using a screwdriver,
loosen the carburetor
draining screw. Gasoline
will begin streaming from
the carburetor.
The drain hose drives
gasoline to the outside
where it should be placed
a suitable container.
Once the gasoline
drained, tighten
draining screw again.
4 Remove the spark plug
(see chapter 8.3) and
pour a tbsp of clean
motor oil (10 ~ 20 ml) in
the cylinder. Pull
startup handle
several times, this will
make the engine spin and
distribute the oil.
install the spark
again.
5 Pull the starter rope slowly
until you feel resistance.
In this point, the piston is
rising in its compression
stroke and the intake
and exhaust valves are
closed. This
helps protecting
engine against internal
corrosion.
the
is
SCREW
the
DRAINING HOSE
the
gently
Then
plug
position
the
27
DRAIN
STARTUP HANDLE