T-Fal AREPA MAKER Instrucciones De Uso página 7

Tfal-AREPA-2016201370_Tfal-AREPA-2016201370 12/04/11 09:35 Page7
2 - Connection and pre-heating
4
CLICK
5
6
Close the appliance (4). Fully unwind the power cord.
Make sure that the electric power supply is compatible
with the power rating and voltage indicated on the bottom
of the appliance.
If an extension cord is used, take all necessary precautions
to prevent anyone from tripping over it ;
make sure to choose one of equivalent diameter.
If the power supply cord is damaged, it must be replaced
by the manufacturer or its service agent or a similarly qualified
person in order to avoid a hazard.
The power supply cord should be regularly examined for signs
of damage, and if the cord is damaged, the appliance
must not be used.
Plug the cord into the wall socket (5) .
The red indicator light will turn on (6).
On first use, there may be a slight odor and a little smoke
during the first few minutes.
This appliance is not intended to be operated by means
of an external timer or separate remote-control system.
7
5-10
mn
It will take around 5-10 minutes for the appliance to pre-heat (7).
As soon as the appliance is pre-heated, the green indicator light
will turn on (8).
After pre-heating, the appliance is ready for use.
8
EN
7