Overload Protector - SG Group 3100W Instrucciones De Uso

Disconnect the battery charge:
1 Stop the generator.
2 Disconnect the negative terminal (-) black cable of the battery.
3 Disconnect the positive terminal (+) red cable of the battery.
WARNING: The battery may release explosive gases. Keep the battery
away from sparks/fire. Charge the battery in ventilated conditions.
CAUTION: The battery electrolyte contains sulfuric acid which will cause
serious burns to the skin and eyes. Therefore you should wear protective close
and a mask.
If the battery electrolyte gets into the eyes, rinse with warm water during 15
minutes at least and call a doctor immediately.
CAUTION: Keep children away.
If the 12V DC outlet has an overload, the safety protector will trip going to the
"OFF" position and the supply will shut down. First remove the charge, wait a
few minutes and then press the protector to reassemble the current output,
changing the protector to "ON".
12V OVERLOAD PROTECTOR
16