Gardenline 49964 Manual Del Usuario página 4

Tabla de contenido

Publicidad

Idiomas disponibles

Idiomas disponibles

Pergola
5
H
H
3
B
3
Bring two Crossbeams (B) together so their open ends meet. Insert
four Screws M6x35mm (3) through Connector (H), through Crossbeams
(B), and through Connecter (H); tighten down using Nut (5).
Place Canopy Guide Bar (F) against the assembled Crossbeams (B).
Insert two Screws M6x35mm (3) through Crossbeams (B) and into
Canopy Guide Bar (F); tightened down to hold parts together.
Repeat for the second set of Crossbeams (B).
6
support@tdcusainc.com
Assembly Instructions
B
F
B
AFTER SALES SUPPORT
1800 599 8898
USA
USA
Pergola
B
2X
I
Insert Crossbeam (D) into Crossbeam (C). Insert two Screws M6x10mm
(1) through Crossbeam (D) and into Crossbeam (C); tightened down to
hold parts together.
Insert two Screws M6x15mm (2) through Plate (I) and into bottoms
of Crossbeam (C) and Crossbeam (D); tightened down to hold parts
together.
AFTER SALES SUPPORT
1800 599 8898
USA
Assembly Instructions
C
1
2
C
USA
D
2X
D
7
support@tdcusainc.com

Publicidad

Tabla de contenido
loading

Tabla de contenido