Precautions For Use; Cleaning And Maintenance; Stainless Steel Surfaces; Enamel Surfaces - Bosch NCM61.A Serie Instrucciones De Uso

Ocultar thumbs Ver también para NCM61.A Serie:
Tabla de contenido

Publicidad

Idiomas disponibles
  • ES

Idiomas disponibles

  • ESPAÑOL, página 19

Precautions for use

The following advice is intended to help you save energy and
prevent pan damage:
Use pans which are suitably sized for the hotplate. The
diameter of the base of the pan should match that of the
hotplate, and should not be smaller.
Use a pan with thick flat base.
Do not use damaged pans that do not sit on the hotplate in a
stable manner.
Place the pan in the centre of the hotplate. Otherwise it could
tip over.

Cleaning and maintenance

Any food which spills onto the hob must be cleaned off
immediately with a dishcloth.
The hotplates should be cleaned with soap and water when
they have cooled.
Dry the hob. Moisture may cause the hotplates to rust over
time. Wet hotplates should be dried quickly.
To protect the surface of the hotplates, treat them with oil or any
other protective product available on the market.

Stainless steel surfaces

Over time, bluish or yellowish stains may appear on the hob
and around the edges of the hotplates. Use stainless steel
cleaners.
It is recommended that the cleaning product available from our
Technical Assistance Service (code 311499) is used regularly.
Avoid using this type of product in areas with screen printed
indications. The indications could be erased.
Do not use abrasive cleaning products.

Technical Assistance Service

When contacting our Technical Assistance Service, please
provide the product number (E-Nr.) and production number
(FD) of the appliance. This information is given on the
specifications plate located on the lower section of the hob and
on the label in the user manual.
Please find the contact data of all countries in the enclosed
customer service list.
To book an engineer visit and product advice
0344 892 8979
GB
Calls charged at local or mobile rate.
01450 2655
IE
0.03 € per minute at peak. Off peak 0.0088 € per
minute.
Rely on the professionalism of the manufacturer. You can
therefore be sure that the repair is carried out by trained service
technicians who carry original spare parts for your appliances.
Always use the pan lids when cooking.
Do not strike the hob and do not place excessive weight on it.
Pans should be placed on the hob carefully.
Do not cover the hob with aluminium foil or similar products
when cooking. This could damage the hob.
Do not allow liquids to boil over onto the hob and hotplates.
Use deep pans when cooking with large quantities of liquid.
The hob must be kept dry. Salt water and wet pans can
damage the hob. Do not cook with wet pans.

Enamel surfaces

Clean the cooking hob using a damp cloth.
Do not use abrasive cleaning products or scouring sponges.
This could cause the hob to lose its shine.

Preventing damage

Caution!
Do not remove the control elements when cleaning the
appliance. The appliance may be damaged if moisture finds
its way inside.
The hob must be kept dry. Salt water and wet pans can
damage the hob.
Try not to spill salt on the surface of the hob.
Never use abrasive products, steel scourers, sharp
implements, knives, etc. to remove bits of hardened food
from the hob.
Do not use steam cleaners. This could damage the hob.

Warranty conditions

In the unlikely event that the appliance is damaged or does not
meet your expectations in terms of quality, please inform us as
soon as possible. For the warranty to be valid, the appliance
must not have been tampered with, or used inappropriately.
The applicable warranty conditions are those set out by the
company's representative office in the country of purchase.
Detailed information is available from retail outlets. Proof of
purchase must be presented to obtain the benefits of the
warranty.
We reserve the right to introduce changes.
17

Publicidad

Tabla de contenido
loading

Este manual también es adecuado para:

Ncm61.l serieNcm615a01/22Cm615a01/68

Tabla de contenido