Intended Use; Product Overview; Symbols On The Product - Husqvarna PP 70 Manual Del Usuario

• this device may not cause harmful interference
• this device must accept any interference received,
including interference that may cause undesired
operation

Intended use

This product is used to operate applicable Husqvarna
electrical power tools with a high frequency motor, for

Product overview

1
2
3
4
5
1. Control panel and status indicator
2. Machine stop button
3. USB connection, for service
4. Outlet for tool connection
5. Water connector outlet
6. Power plug, different power plugs for different
markets
7. RCD reset knob
8. RCD test button
9. Transportation handle
10. Water connector inlet
11. Operator's manual
1244 - 003 - 26.05.2020
example power cutters and drills. All other use is
incorrect.
The product is kept cool with water. Always use the
product with water supply.
The product is for professional operation only.
8
7
10
6

Symbols on the product

WARNING: Not careful or incorrect use can
result in injury or death to the operator or
others.
Read the manual carefully and make sure
that you understand the instructions before
you use the product.
Inspection and/or maintenance must be
done with the motor stopped and the power
plug disconnected.
9
11
3