Publicidad
Should you want to move the
unit in the future DO NOT GLUE
the filler blocks in place.
Filler Blocks
Filler Blocks
Step 4:
The last step is to apply concrete adhesive, and
install the filler blocks in the fork pockets.
There are (2) custom bullnose arch pieces inside
the bottom unit that will need to be cut and
installed when final grade is determined.
Be sure to remove the packaging around the pizza
cooking stone before you light the fire.
Fully Assembled Outdoor Pizza Oven: Step 4
Cambridge Fully Assembled
Paso 4:
El último paso es aplique adhesivo concreta e instalar
los bloques de relleno en los bolsillos de la horquilla.
En el futuro si desea mover la unidad no use pega-
mento.
Asegúrese de quitar el embalaje alrededor de la pizza
piedra antes de luz el fuego de la cocina.
9
Outdoor Pizza Oven
Publicidad
