Clutch Lever; Control And Clutch Lever Adjustment - RIEJU RS3 50 Manual Del Propietário

CLUTCH LEVER

CLUTCH LEVER

CONTROL AND CLUTCH LEVER ADJUSTMENT

To increase or decrease the tension on the clutch lever:
1 - Remove the rubber (A).
2 - Loosen the adjuster nut (B).
3 - Move the wheel (C) to load or unload the cable.
4 - Re tighten the adjuster nut (B) to set the position.
ATTENTION ATTENTION
Normal clutch clearance is 2.5 mm measured at the opening of
the tip of the lever.
58
RS3 50
A
C B
MAINTENANCE