Wired Connection; W W - THOMSON DSC 353G Manual De Uso

C - INSTALLATION

2.3 - WIRED CONNECTION

If you do not want to use a wireless connection, connect your camera to the Internet using an RJ45
network cable.
Modem/router
connected to
the internet
IMPORTANT: Do not connect your camera to your computer. This will not provide it with access to the
internet.
In most cases, the camera is immediately detected by the modem/router, which grants it access to the
Internet. After a few seconds, the camera's network activity LED should flash.
Click the icon then scan the QR code on the camera. If your camera is correctly connected to the
internet, it will be automatically added.
NOTE: If it is not added automatically and the application asks you to choose between LAN and WiFi, your
camera or smartphone is having problems accessing the internet. Check your camera's, smartphone's or
tablet's connection and Reset the camera by pressing for more than 15s on the Reset button.
N.B. if you would like to use your camera with WiFi but cannot use the EzLink function, start it up with a
wired connection to then be able to move to a wireless connection.
10
EN
u . e i t y u r e c n s s o m o t h w . w w
720P HD WIFI IP CAMERA
camera
Mains adapter