Wired Connection; Important - THOMSON DSC-523W Manual De Instrucciones

MOTORISED 720P HD WIFI IP CAMERA

2.3. WIRED CONNECTION

If you do not want to use a wireless connection or the device does not have EzLink, connect your camera
to the Internet using an RJ45 network cable.
Mains adapter
IMPORTANT: Do not connect your camera to your computer. This will not provide it with access to the
Internet.
Mains adapter
In most cases, the camera is immediately detected by the modem/router, which grants it access to the
Internet. After a few seconds, the camera's network activity LED should flash.
Click on , then scan the QR code on the camera. If your camera is properly connected to the Internet,
it will be automatically added.
NOTE: If your camera is not added automatically and the app asks you to choose between LAN and
WiFi, your camera or smartphone has an Internet access problem. Check the connection of your camera,
smartphone or tablet, and perform a camera reset by pressing the Reset button for more than 15 seconds.
Note: If you want to use your camera with WiFi but cannot use either the WPS or EzLink function, set it up
with a wired connection so that you can then change to a wireless connection.
camera
OUT IN
Micro SD
camera
www.thomsonsecurity.eu
OUT IN
Micro SD
Modem/router
connected to the
internet
Computer
EN EN
9