Product-Dependent Symbols; Symbols On The Product; Product Information; Declaration Of Conformity - Hilti SCO 6-A22 Manual De Uso

Ocultar thumbs Ver también para SCO 6-A22:
Tabla de contenido

Publicidad

Idiomas disponibles

Idiomas disponibles

1.3

Product-dependent symbols

1.3.1

Symbols on the product

The following symbols are used on the product:
Wear protective glasses
Direct current (DC)
Rated speed under no load
Revolutions per minute
Revolutions per minute
The product supports wireless data transmission compatible with iOS and Android platforms.
Li-ion battery
Hilti Li-ion battery type series used. Observe the information given in the section headed In-
tended use.
Never use the battery as a striking tool.
Do not drop the battery. Never use a battery that has suffered an impact or is damaged in any
other way.
1.4

Product information

Hilti products are designed for professional use and may be operated, serviced and maintained only by
trained, authorized personnel. This personnel must be specifically informed about the possible hazards. The
product and its ancillary equipment can present hazards if used incorrectly by untrained personnel or if used
not in accordance with the intended use.
The type designation and serial number are printed on the rating plate.
▶ Write down the serial number in the table below. You will be required to state the product details when
contacting Hilti Service or your local Hilti organization to inquire about the product.
Product information
Cut-out tool
Generation
Serial no.
1.5

Declaration of conformity

We declare, on our sole responsibility, that the product described here complies with the applicable directives
and standards. A copy of the declaration issued by the certification department can be found at the end of
this documentation.
The technical documentation is filed here:
Hilti Entwicklungsgesellschaft mbH | Tool Certification | Hiltistrasse 6 | 86916 Kaufering, Germany
2
Safety
2.1

General power tool safety warnings

WARNING
Read all safety warnings and all instructions. Failure to follow the warnings and instructions may result in
electric shock, fire and/or serious injury.
Save all warnings and instructions for future reference.
Work area safety
▶ Keep work area clean and well lit. Cluttered or dark areas invite accidents.
2
English
SCO 6-A22
01
2143544
*2143544*

Publicidad

Tabla de contenido
loading

Tabla de contenido