Product-Dependent Symbols; Symbols On The Product - Hilti DSH 600-X Manual De Instrucciones

CAUTION
CAUTION !
▶ Draws attention to a potentially dangerous situation that could lead to personal injury or damage to the
equipment or other property.
1.2.2 Symbols in the operating instructions
The following symbols are used in these operating instructions:
Comply with the operating instructions
Instructions for use and other useful information
Dealing with recyclable materials
Do not dispose of electric equipment and batteries as household waste
1.2.3 Symbols in illustrations
The following symbols are used in illustrations:
These numbers refer to the illustrations at the beginning of these operating instructions.
The numbering reflects the sequence of operations shown in the illustrations and may deviate
from the steps described in the text.
Item reference numbers are used in the overview illustration and refer to the numbers used in
the key in the product overview section.
These characters are intended to specifically draw your attention to certain points when handling
the product.
1.3

Product-dependent symbols

1.3.1

Symbols on the product

The following symbols are used on the product:
WARNING! Read and follow all safety precautions in the operator's manual. Failure to follow these
instructions could result in serious or fatal injury.
Direction-of-rotation arrow on the guard
Engine stop position
Engine run position
Primer bulb
Full-throttle jet adjusting screw
Idling jet adjusting screw
Idling adjusting screw
Fuel mixture
Fuel-tank cap opening direction
Speed
Revolutions per minute
*2136486*
2136486 English 21