SMASH 16 Manual De Instrucciones página 57

c. Make certain that the area in which you are cutting is free from obstructions. Do
not let the nose of the guide bar contact a log, branch, or any other obstruction
which could be hit while you are operating the saw.
d. Out at high engine speeds.
e. Do not overreach or cut above shoulder height.
f. Follow manufacturers sharpening and maintenance instructions for saw chain.
g. Only use replacement bars and chains specified by the manufacturer or the
equivalent.
MAINTENANCE
In order to maintain your product in proper working order, perform the
maintenance and checking operations described in the manual at regular
intervals.
Always be sure to turn off the engine before performing any maintenance or
checking procedures.
WARNING!
The metallic parts reach high temperatures immediately after
stopping the engine. Leave all maintenance other than the items
listed in the Owner's Manual to your competent servicing dealer.
TRANSPORTATION
Always carry the unit with the engine stopped, the guide bar covered with the
protector to the rare, and the exhaust away from your body.
STORAGE
WARNING!
Stop engine and allow to cool, and secure the unit before storing or transporting in
a vehicle.
a. Store unit and fuel in an area where fuel vapors cannot reach sparks
or open flames from water heaters, electric motors or switches, etc.
b. Store unit with all guards in place. Store the unit out of reach of children.
57