Fuel And Chain Oil - SMASH 16 Manual De Instrucciones

Tabla de contenido

Publicidad

Idiomas disponibles

Idiomas disponibles

FUEL AND CHAIN OIL

Recommended mixing ratio to 2,5% (40:1)
Each 25 cc of totally synthetic oil for 2 stroke engines with one litre of unleaded
fuel of 95 grades.
With the purpose of obtaining a good fuel mixture, place the oil in an accredited
container for fuel before placing the fuel. The use of low quality fuel and oil, can
reduce the lifetime of the pieces of the machine.
The properties of the fuel mixture can be deteriorated with time, and it must be
used before 2 months. We recommend to prepare the fuel mixture according to
the immediate necessities. Do not use more than two months fuel mixture since it
could signify a bad engine performance.
WARNING!
Shake well the fuel mixture container before pouring it into the machine.
Keep open flames away from the area where fuel is handled or stored.
Mix and store fuel only in an approved gasoline container.
NOTE
Most engine troubles are caused, directly or indirectly, by the fuel used on the
machine. Take special care not to mix it with a motor oil for 4 cycle engines.
FUEL
Mix unleaded fuel grade 95 and totally synthetic oil for 2
stroke engines.
CHAIN OIL
Use motor oil SAE #10W-30 all year round or SAE
#30~#40 in summer and SAE #20 in winter.
NOTE
Do not use wasted or regenerated oil that can cause
damage to the oil pump.
60

Hide quick links:

Publicidad

Tabla de contenido
loading

Productos relacionados para SMASH 16

Tabla de contenido