Security Settings In The Web Page; About Transfer Of Copied Data To The Machine - Sharp AR-FR11 U Manual De Instrucciones

ENGLISH

Security settings in the Web page

When the machine is used as a network printer and the Pull Print function is used, the data
security kit enables authentication of the user by means of a "USER NAME" and
"PASSWORD". (The Pull Print function allows a file on a previously stored FTP server to be
printed directly from the operation panel of the machine without using the printer driver; see
"Directly printing a file on an FTP server" on page 3-9 of the "OPERATION MANUAL (for
printer)".)
User authentication is enabled by selecting the "Enable User Authentication" checkbox in
the machine's Web page for Pull Print function settings. (This checkbox appears when the
data security kit is installed, and is initially selected (a checkmark appears)).
System requirements and the procedure for accessing the Web page containing this
checkbox are explained in "REMOTE OPERATION VIA A NETWORK" on page 3-2 of the
"OPERATION MANUAL (for printer)". The checkbox appears in the screen shown in step 2
of "I Storing an FTP server" on page 3-9 of the "OPERATION MANUAL (for printer)".
I I I I Procedure for directly printing a file on an FTP server when
user authentication is enabled
Your user name and password must be entered following selection of the FTP server
that contains the file to be printed from the touch panel of the machine.
When the FTP server is selected in step 3 of "I Printing a file on an FTP server from the
operation panel of the machine" on page 3-9 of the "OPERATION MANUAL (for
printer)", a screen will appear prompting you to enter your user name and password for
the FTP server.
ENTER THE USER NAME AND PASSWORD FOR FTP SERVER.
USER NAME
PASSWORD
Press the [USER NAME] key to enter your user name and the [PASSWORD] key to
enter your password. A letter entry screen will appear in each case. When you have
finished entering your user name/password, touch the [OK] key.
After entering your user name and password, continue from step 4 on page 3-10 of the
"OPERATION MANUAL (for printer)".

About transfer of copied data to the machine

When the data security kit is installed and the Web page is used to copy data stored with
the document filing function to a computer (page 3-4 of the "Operation manual (for
printer)"), the copied data can only be transferred back to the original machine from which it
was copied; the data cannot be transferred to another machine even if the machine
conditions are the same.
The [Restore from PC] key will only appear in the Web page and transfer of data back to the
machine will only be possible when a confidential folder is selected.
CANCEL OK
4