Ninja BL494 Instrucciones Importantes De Seguridad página 16

Assembly and Use of the Blend & Prep Bowl - cont.
USE
CHOPPING BLADE
ASSEMBLY
Fig. 1
USING THE CHOPPING BLADE ASSEMBLY
1
Review warning and caution statements on page 14 before
proceeding to number 2.
2 Place the motor base on a clean, dry, level surface such as a
counter or table top. Press down on the motor base to make
sure that the suction cups adhere to the counter or table top.
3 Secure the bowl onto the motor base.
4
Holding the Chopping Blade Assembly by the shaft, place it
onto the gear shaft inside the bowl. Ensure that the Chopping
Blade Assembly fits around the gear shaft and that it is
standing straight. (Fig. 1)
5
Add the ingredients and secure the bowl lid onto the bowl.
6 Plug the power cord into the electrical outlet. Once the bowl
is engaged, the programs available for that attachment
will illuminate. Select the speed or Auto-iQ
best suits your needs. Pulse ingredients for even chopping
by holding the Pulse button until your desired consistency is
reached.
NOTE: Please refer to "Speed Settings & Uses" chart for
suggested uses and speeds.
7 When you have reached your desired consistency, stop the
appliance by pressing the STOP/START button. Wait for
the Chopping Blade Assembly to stop turning. (Fig. 2)
8
To remove the lid, press the release button on the lid and pull
the lid handle up to a 90° angle. (Fig. 2)
9 Turn the bowl counter-clockwise and lift it to remove it from
the motor base. (Fig. 3)
10 To release the motor base from the counter or table top, place
your hands underneath both sides of the motor base and
gently pull the unit up and towards you. (Fig. 4)
15 1-877-646-5288
REMOVAL
Fig. 2 Fig. 3
program that
™
Fig. 4
USING THE DOUGH BLADE ASSEMBLY
1
Review warning and caution statements on page 14 before
proceeding to number 2.
2 Place the motor base on a clean, dry, level surface such as a
counter or table top. Press down on the motor base to make
sure that the suction cups adhere to the counter or table top.
3 Secure the bowl onto the motor base.
4
Holding the Dough Blade Assembly by the shaft, place it onto
the gear shaft inside the bowl. Ensure that the Dough Blade
Assembly fits around the gear shaft and that it is standing
straight. (Fig. 5)
5
Add the ingredients and secure the bowl lid onto the bowl.
6 Plug the power cord into the electrical outlet. Once the Bowl
is engaged, the programs available for that attachment will
illuminate. Select the MIX/DOUGH button and process until
ingredients come together to form a mass.
NOTE: Please refer to "Speed Settings & Uses" chart for
suggested uses and speeds.
7 Once finished making the dough, stop the appliance by
pressing the STOP/START button. Wait for the Dough
Blade Assembly to stop turning. (Fig. 2)
8
To remove the lid, press the release button on the lid and pull
the lid handle up to a 90° angle. (Fig. 2)
9 Turn the bowl counter-clockwise and lift it to remove it from
the motor base. (Fig. 3)
10 To release the motor base from the counter or table top, place
your hands underneath both sides of the motor base and
gently pull the unit up and towards you. (Fig. 4)
USE
DOUGH BLADE
ASSEMBLY
Fig. 5