Electrical Connections; Plumbing Connections; Assembly Instructions 613-614 - Teuco 613 Instrucciones De Montaje

INSTRUCTIONS FOR INSTALLATION Art. 613-614
The product must be installed exactly as supplied by Teuco, otherwise warranty will be invalidated.
The directions for installation must be observed to the letter, as must those concerning recommended materials and the accessories
supplied with the product.
Electrical connections must be carried out in compliance with national safety regulations, as indicated in the preinstallation data sheet.
This manual constitutes an integral part of the product and must be kept for future reference.
Data and specifications indicated are not binding on the company: Teuco Guzzini SpA reserves the right to make such changes as are
deemed appropriate without prior notice and without any obligation to update.
This product is intended for home use. In the event of a Teuco minipool being commissioned for public use, procurement managers
must ensure compliance with all statutory regulations governing safety, water treatment and utility systems normally in force in the
country of installation.
3
OPENING THE PACKING AND
HANDLING THE MINIPOOL
Remove the crate and packing, leaving the minipool on the
pallet.
Whatever transport and handling operations are
involved, use only the pallet on which the minipool is
packed for shipment.
THE MINIPOOL MUST NEVER BE LIFTED
4
FITTING THE CANVAS
Secure the straps of the canvas to the panels of the
minipool with the screws provided (see illustration).
The canvas must be held down with the straps and, if
necessary, locked for added security.
The cover is not intended to carry weights.
Do not sit, step or lie on the cover.
Do not place objects on the cover.
The canvas can be dangerous if not secured or properly
closed.
Failure to follow the instructions for securing the
canvas can result in danger to the user.
Remove the canvas completely before stepping into the
pool, otherwise there is a risk of being trapped.
5

PLUMBING CONNECTIONS

DRAIN CONNECTION
The Teuco minipool has a drain valve.
Connect the valve to the main drain by way of a trap (see
preinstallation data sheet - step 2).
FILL CONNECTION
The recommended method of filling the Teuco minipool is
to use a hose (taking care not to immerse the end as this
could cause a reflux of water back into the main).
WARNINGS

ELECTRICAL CONNECTIONS

6
A
Remove the inspection panel, undoing the screws as
indicated.
6
B
Make the connection to the a.c. power supply at the
terminal box (D) provided on the minipool.
Electrical connections must be made in compliance with
safety regulations, as indicated in the preinstallation data
sheet (step 2).
The size of the power cable and the relative clamp must be
selected according to the current load, the distance from
the junction box and the way the cable is laid and routed.
The jobs of holing the terminal box and selecting and
fitting the IPX5 clamp are the responsibility of the
installer.
Having made all the connections, check that the system
operates correctly (see user manual - STARTING UP
FIRST TIME).
CAUTION: POWER UP THE ELECTRICAL EQUIPMENT
ONLY AFTER THE MINIPOOL HAS BEEN FILLED WITH
WATER.
Refit the inspection panel to the minipool, lining up the
holes in the panel with the holes in the frame
GB
13