ascaso
the temperature pilot light
flashing.
3.
Making coffee
Check your system: Ground, pod or
capsule.
Ground (mobile filter holder)
Any type of coffee may be used,
ground or pod, thanks to the 5 filters
supplied: 2 ground filters (1- and
2-cup), 2 pressurised filters (1- and
2-cup Cream+) and 1 pod filter.
For optimal results, we advise using
ready mixes for espressos, as they
have the appropriate ground size for
use with ground filters. If the results
are not as expected, use pressurised
filters, which will give good results
regardless of ground size.
Regardless of the type of filter used
for ground coffee, and depending
on the whether the coffee comes out
quickly or slowly, we recommend
changing the type of coffee, the
ground size or experimenting with
compactness to suit your preference.
Figure 2A
24
stops
13
Figure 3
If using ground coffee:
1. Turn on the machine, turning the
general switch
Place the filter holder
filter) in the group
2. Wait for the pilot light
on without flashing. This takes
approx 1.5 minutes. This shows
that the water has reached the
right temperature.
Turn on the coffee switch
let the water flow through the
group. Performing this procedure
before making coffee will eliminate
residues and establish the
temperature for optimal service.
3. The filter must be filled to 3/4 its
capacity, once the coffee has
been tamped down (see figure
2A).
4. Clean the coffee residues that
have been deposited on the
edges of the filter to ensure a
perfect fit.
5. Attach the filter holder
Figure 2B
group and
right, exerting sufficient pressure
at the end. (See figure 3).
6. Place the cups or cup on the tray
and turn on the coffee switch
7. When the coffee is made, turn off
the coffee switch
to position (I).
2
(with
7
.
8
to come
13
and
1
to the
7
turn from left to
8
1
.
1
.