Description On Functional Usage Of Wired Controller; On/Off; Mode Setting; Temperature Setting - Airo YXEA03U Manual De Usuario

Description on Functional Usage of Wired Controller

1. ON/OFF

Press ON/OFF button
again, the appliance will stop operating.

2. Mode setting

Used to select different operating modes and switch between cooling – dry – Fan –
heating and AUTO. Every time the mode button
change in following sequence:
NOTE:
AUTO mode is unavailable on some of the models and will be invalid during mode setting.
For cooling only and heating disabled models, heating mode is invalid during mode setting.

3. Temperature setting

Under any state, press
Every time the "
Every time the "
NOTE:
1. Heating mode is invalid for cooling only models.
2. The default setting range depends on indoor unit and defaults to 16℃-30℃ for some of the
models.
3. When setting temperature exceeds the range mentioned above, the setting temperature cannot
be increased or decreased anymore and

4. Fan speed setting

Press fan speed button
in following order:
(The icons will be turned on circularly
NOTE:
AUTO fan is invalid for "FAN" mode.
AUTO fan speed is the default setting under the DRY mode, unabling adjusting.
, the appliance will start to operate; once this button is pressed
DRY
COOLING
or
" button is pressed, the temperature will increase by 1℃;
" button is pressed, the temperature will decrease by 1℃.
Temperature setting range
Cooling, heating and DRY
FAN
in ON state to adjust fan speed. The fan speed will change
AUTO
along the direction of arrow)
is pressed, the operating mode will
FAN
HEATING
button to enter into temperature setting state.
18
Cannot set
" " icon will be displayed on liquid crystal display.
HIGH
24
AUTO
℃~ 32 ℃
LOW
MEDIUM