Button Lock Setting; Filter Clean And Resetting - Airo YXEA03U Manual De Usuario

Description on Functional Usage of Wired Controller

10. Button lock setting

After setting of wired controller is completed, you can set the button lock to prevent
children or others from operating mistakenly. After button lock is set, any operation to the
wired controller will be invalid.
Hold down"
operation again to cancel lock.

11. Filter clean and resetting

When the filter needs to be maintained and washed, filter clean icon
appear on screen of wired controller.
Please contact professionals to carry out maintenance of filter. After completion, hold down
" " button for 3s, then the buzzer will beep four times to hint that the filter has been
cleaned and reset.
NOTE:
Filter hint is only available to some of the models. For its washing, cleaning and replacement, please
read indoor unit operation instructions for details. During washing and maintenance, please always
stop operation of air conditioner and turn off power supply.
" key and " " key for 3s simutaneouslyto set button lock. Repeat the
(Applicable to existing filter hint function and shall
be carried out by professionals)
27
will