Essentials Precise Steam Cleaner
Please read and keep these instructions
Quick start
Fill the tank up to a maximum of 0.75 litre of water (using warm water
1
will reduce the heat-up time). Screw cap on and tighten fully.
Attach the hose and required accessories.
2
Connect to the power supply.
3
Press the on/off button to start heat-up. When orange light turns off,
4
the steam is ready.
Press the trigger on the handle to release the steam.
5
Aim the steam safely: at the start water may be ejected. Hold over a
6
sink or bucket until excess water has cleared.
Descaling
Descale regularly, do not wait for a problem to occur. In very hard water
areas, we recommend using distilled water.