Hints And Tips - Saivod STEAM COMPACT SC 235 Manual De Instrucciones

Jet nozzle
Ò
1 Push the jet nozzle directly onto the
the handle connection nozzle as
far as they will go until you hear a
click
N.
2 It can be used with various fittings,
eg. the angled nozzle and small
large brush attachments, and small
spade depending on the task.
• The jet nozzle can be used with
various fittings for cleaning
inaccessible areas such as corners,
joints, blinds, radiators and toilets
as well as various surfaces such as
stainless steel, windows, mirrors,
enamelled surfaces and also for
stain removal.
Brush attachments
Ô
1 Choose the desired plastic brush
attachment for the task O.
2 Fit the brush attachment onto the
jet nozzle by pushing o
a clockwise direction to lock into place.
3 Turn anti-clockwise and pull to remove. .
IMPORTANT: Do not use the brass
brush on grouting or delicate
surfaces. Always test a hidden area
before using steam on any surface.
Upholstery
attachment
È
1 Fit the rectangular upholstery
steam nozzle to the jet nozzle
by pushing on and turning
clockwise to lock P.
2 This nozzle can be used with or
without the cotton cover Í.
3 Turn anti-clockwise and pull to
remove.
• This nozzle is ideal for cleaning
cushions, carpets and car seats.
IMPORTANT: Always test on a
hidden area before you start. Steam
cleaning may not be suitable for
certain fabrics such as dralon due
to the high temperature of the
steam.
6 6
Window squeegee
attachment
1 This attachment
cover is ideal for cleaning
windows, mirrors, ceramic tiles and
other non porous smooth surfaces.
• Apply the steam evenly to the glass
surface from a distance of 10-15
cm. Then switch the steam off and
wipe the moisture off the glass from
top to bottom using the rubber
squeegee. Wipe the rubber
squeegee and the lower edge of
the window. Dry after every strip.
IMPORTANT: Glass surfaces can
be shattered by the sudden
application of excessive heat. Warm
glass surfaces first from a distance
of 20-25 cm. Continue at a
distance of 10-15 cm.
n and turn in

HINTS AND TIPS

Tube park
• During use the tubes and nozzle
can be stored in the park position
for short breaks whilst cleaning R.
Tool storage cart
Press down the latch
storage cart
remove from the cart. S
The accessories for your steam
cleaner can be neatly stored in the
cart.
Press downward with the tongue
in front goes into place firstly and
lock back part into place, a click
will be heard.
È
without cloth
Q
.
of tool
2
and lift up body to
⁄
.
N
O
P
Q
R
S