Livestrong LS8.0E Manual Del Propietário página 5

ASSEMBLY STEP 1
LS8.0E SHOWN
ALL
STABILIZER TUBE
MODELS
ARC WASHERS (C)
SPRING WASHERS (B)
BOLTS (A)
MAIN FRAME
LS10.0E, LS13.0E
SHOWN
ARC WASHERS (C)
SPRING WASHERS (B)
BOLTS (A)
MAIN FRAME
8
LS8-LS10-LS13E-OM_Rev1.3.indd 8-9
HARDWARE BAG 1 CONTENTS :
BOLT (A) SPRING WASHER (B)
30 mm 15 mm
Qty: 4 Qty: 4
Open hardware bag 1.
A
Attach the stabilizer tube to the main
B
frame using 2 bolts (a), 2 spring
washers (b) and 2 arc washers (c) on
each side.
STABILIZER TUBE
LS8.0E ASSEMBLY STEP 2
LS8.0E SHOWN
ARC WASHER (C)
17 mm NUTS (G)
Qty: 4
SPRING WASHERS (F)
FLAT WASHERS (E)
GUIDE RAIL SET
BOLTS (J)
SPRING WASHERS (I)
FLAT WASHERS (H)
MANUAL INCLINE
LIFT LEVER
GUIDE RAIL SET
HARDWARE BAG 2 CONTENTS
MANUAL INCLINE
LIFT LEVER
BOLT (D) FLAT WASHER (E)
16 mm
35 mm
Qty: 4 Qty: 4
FLAT WASHER (H)
20 mm
Qty: 4
* This step is for LS8.0E only.
BOLTS (D)
Open hardware bag 2.
A
Attach manual incline lift lever to guide
B
rail set using 4 bolts (d), 4 flat washers
(e), 4 spring washers (f) and 4 nuts (g).
Align guide rail set with main frame as
C
shown.
D Lift up on the manual incline lift lever
and place it in one of the holes inside the main
frame.
Attach the guide rail set to the main frame
E
using 4 bolts (J), 4 spring washers (i) and
MAIN FRAME
4 flat washers (h).
SPRING WASHER (F)
NUT (G)
LS8.0E
15 mm
Qty: 4
Qty: 4
SPRING WASHER (I) BOLT (J)
18 mm 25 mm
Qty: 4 Qty: 4
9
7/22/10 1:48 PM