Other Operations; Volume Control - Lenco SCD-69 Manual Del Usuario

3. Press "Station" button to choose available DAB stations, press "Enter" to change
station.
Listening to FM radio
1. Extend the antenna.
2. Press "Mode" to choose FM mode.
3. Press "Station" button to move every 0.05MHz
4. Press and hold "Station" button for 2 seconds and then release the button, it will scan
and stop at next broadcast station.

Other Operations

Store Stations
1. Select the station you wish to presets.
2. Press and hold "Preset" button until the LCD display Preset Store.
3. Press "Station" buttons to select which preset number you like.
4. Press "Enter" button to confirm.
Recall Preset Stations
1. Press "Preset" button once, the LCD display Preset Recall.
2. Press "Station" buttons to select which preset station you would recall.
3. Press "Enter" button to confirm.

Volume control

You could press volume (-) or (+) to adjust the speaker loudness.
Using the Info control
It is possible to change the information that is displayed
on the LCD at each mode. To change the information
display, press "Info/menu" button once.
Audio CD/AUX mode
Information cycling through: Power source, time and
date.
MP3 CD/USB mode
Information cycling through: Power source, time, date, album, artist and title.
DAB mode
Information cycling through: DLS, signal strength, programme type(PTY), Ensemble name,
channel number/frequency, signal error rate, bit rate, power source, time and date.
FM mode
Information cycling through: Radio text, programme type(PTY), frequency, Mono/Stereo,
power source, time and date.
9