Tabla de contenido
Publicidad
Idiomas disponibles
Idiomas disponibles
÷
÷
STEREO AND SECOND AUDIO PROGRAM
(SAP)
The TV is equipped with a feature known as Multi-channel
TV
Sound or MTS. MTS broadcasts
greatly enhance TV viewing
by bringing you programs
with high fidelity stereo sound.
MTS also provides
an extra channel
called the Second
Audio Program or SAP which broadcasters
can use to
transmit
a second
language
for bilingual
transmission
or for
other purposes.
LISTENING
TO STEREO
SOUND
When the TV is turned on or a channel
selection
is made,
make certain that the word 'STEREO"
appears
on the
screen. This means that "Stereo"
broadcasting
is available.
You can enjoy stereo sound from the left and right speakers.
• When the "MONO"
broadcasting
is received,
no indication
is displayed.
• If the broadcast
signal is not strong enough or clear stereo
sound is not available,
press the AUDIO
SELECT
button
to change to mono sound. The noise should be eliminated.
Press it again to return to the stereo sound.
USTENtNG
TO SAP (SECOND
AUDIO
PROGRAM)
When the TV is turned on or a channel selection is made, make
certain that the letters "SAP" appear on the screen. This means
that the "Second Audio Program" broadcasting is available.
TO SELECT DESIRED SOUND
Press the AUDIO SELECT
button to select the desired sound.
I_ONO+SAP
BROADCASTING
[
1
MAiN + SAP SOUND
[MA'NSOUNDj
--'I_(MONO)
SAPSOUND
_
(MONO}
t
1
STEREO+SAP
BROADCASTING
F"'_ /
MAIN SOUND
(STEREO}
1
,,,,_
[
SAP SOUND
4,
MAiN SOUND
_
MAIN + SAP SOUND
(MONO)
(MONO)
NOTE: If connecting this TV with a VCR and/or Cable box, to
receive stereo sound you must use audio/video cables for all
connections.
You must also verify that your VCR and/or Cable
SOUND ADJUSTNENTS
box a rc stereo units=
You can adjust the setting for bass, treble, balance,
surround
and stable sound.
rq
@
Press the MENU button.
Press the SET + or - button until
the indicator
next to "AUDIO"
begins to flash, then press the
ENTER button.
I
MENU
|OH SETUP
klI£1CTURE
|AUDIO
/IIL_ANGUAGE
|V CHIP SET
E+I-IENTERIMENU>
Press the ENTER button repeatedly
to select the item
you want to adjust.
::i
F_
Use the SET + or-
button to adiust the setting,
+
E
BASS
stronger
weaker
TREBLE
stronger
weaker
BALANCE
right speaker stronger
left speaker stronger
SURROUND
ON
OFF
STABLE SOUND
ON
OFF
SURROUND FEATURE
The SURROUND feature expands the audio listening field
wider and deeper to create exceptional sound quality from
the TV's speakers. The feature uses stereo signals from a
TV broadcast or video input.
STABLE
SOUND
FEATURE
When a loud sound is broadcast
the stable sound feature
assists
in balancing
the volume
to a more comfortable
listening level
TO RETURN
TO _NmAL
SETTmNG
Pressing the RESET button while making sound adiustments,
will return all adjustments
to the factory preset levels.
NOTE:
The omscreen
display will disappear 6 seconds after finishing
an adiustment.
The settings can only be adjusted
while they
are displayed
on the TV screen.
ADJUSTING
PICTURE
You can adjust the settings
for color, sharpness,
contrast,
brightness
and tint.
[_
Press the MENU button.
[_
Press the SET
button until the indicator next to
+ or
"PICTURE" begins to flash, then press the ENTER button.
Press the ENTER button
to select the item
repeatedly
you
want to adjust.
Press the SET + or -
button to adjust the setting.
+
BRIGHTNESS
increase brightness
decrease brightness
CONTRAST
increase contrast
decrease contrast
COLOR
brilliant color
pale color
TINT
greenish color
reddish color
SHARPNESS
makes picture clearer
makes picture softer
TO RETURN TO INITIAL SETTING
BRIGHTNESS --> CONTRAST --> COLOR --> TINT ---> SHARPNESS
Press the RESET
button while the picture adiusting
mode
m
appears
on-screen.
10
÷
3R20521A-E
10
_
27/4/04,
14:05
Publicidad
Tabla de contenido
