Initial Settings; Set Automatic Record; Set The Date / Time - Snooper DVR-4HD Manual Del Usuario

2.6 Initial Settings

Before using the device, we recommend you to enable the Automatic Record function and set up the correct
Date and Time.

2.6.1 Set Automatic Record

Default setting of Automatic Record is Enabled. The device will automatically start recording when powered
on. In case Automatic Record is disabled, enable it by the following steps:
1. Touch to enter Main Menu.
to switchover to Record Main Menu.
2. Touch
3. Touch / to select
Record function menu; touch
ON.
4. Touch to return to Record screen.

2.6.2 Set the Date / Time

To set the correct date and time, do the following:
1. Touch to enter Main Menu.
2. In System main menu, touch
select for Set Timezone menu, touch
to set the current time zone; then touch
complete setting.
for entering Automatic
again to select
/ to
/
again to
EN • 12
DVR 4HD 2015 V1.1 12/4 MultiLing
© copyright 2015