Snooper DVR-4HD Manual Del Usuario página 34

Main Menu Function List
Add speed
point
File /
Delete
Position
speed point
LDWS
FCWS
Front
Vehicle Go
Driving
Safety
Headlight
Warning
Speed Cam
Alert
Speed Limit
Alert
Driver
Fatigue
Alert
Description
Manually add speed points after satellite
positioning, up to 200 user defined speed
points can be added.
Delete all the user defined speed points
from system.
Once your car's location is determined by
GPS and the LDWS function is enabled,
this product produces voice and screen
message alerts when you drive off of or
change lanes at speeds over 50 km/h (31
mile/h).
When FCWS is activated after satellite
positioning, device will issue a voice alert
and an alarm image when vehicle speed
is above 60 km/h (37 mile/h) and the
distance with the front vehicle is less than
20m.
Once your car's location is determined by
GPS and the Front Vehicle Go function is
enabled, this product starts to detect the
motion of cars in front of you after your
car remains motionless for 20 seconds. It
produces voice and screen message alerts
when the movement of the car in front of
you changes its images in the camera.
When Headlight is activated, device will
issue a voice alert and an alarm screen
reminding that insufficient brightness is
sensed on the recording face.
If the Speed Cam Alert function is
enabled, once your car's location is
determined by GPS and approaches a
speed cam, this product produces voice
and screen message alerts.
If the Speed Limit Alert function is
enabled, this product produces voice
message alerts once your car's location is
determined by GPS and its running speed
exceeds the set limit.
If the Driver Fatigue Alert function is
enabled, this product produces voice
and screen message alerts one hour after
it has begun recording and repeats the
alerts every half an hour afterwards.
EN • 33
Available Option
On / Off
On / Off
On / Off
On / Off
On / Off
Off /
50 km/h ~ 200 km/h
Off/
13mph ~ 120mph
On / Off
DVR 4HD 2015 V1.1 12/4 MultiLing
© copyright 2015