Key 1-Init Msg (Modify Init Message); Key 2 - User Password; Key 3-Day/Night - Bentel Security FC500 Manual Del Usuario

KEY 1-INIT MSG (Modify Init Message)

If Key 1 is selected, the display used to enter or update
the Init message appears. In this phase:
Alphanumeric keypad The Alphanumeric keypad is
used to enter or update the welcome message.
Cursor Keys Use the UP key to change the selected
letter from lower case to upper case;
Use the Down Key to change the selected letter from
upper case to lower case;
Use the Right Key to select the next character to be
modified;
Use the Left Key to select the previous character to be
modified.
ESC Key Use ESC key to cancel the operation and to
step back to previous page.
ENTER key Use ENTER key to confirm the message.
Function Keys No function is related to F1 key;
No function is related to F2 key;
Use the F3 key to cancel the character, if mistaken, in-
sert the new character;
No function is related to F4 Key.
Access level
System
PANEL NAME
[---------------------------]
^
Cursor
Figure 61 Display Init Message
50
This symbol shows the
presence of the connection
between the User Interface
Control panel
Status and the Main Board
lev. 2 : MODIFY
Master Panel
Name of Control Panel
Analogue Fire Panels

KEY 2 - User Password

Use the 2 key to Modify the User Password (see Figure
59).

KEY 3-DAY/NIGHT

If Key 3 is selected, the Day/Night mode Lev. 2 display
appears; this can be used to change the control panel
operating mode: Day mode or Night mode.
+
The Day mode indicator light will change status
Nivel de acceso
System
DATE AND TIME
hh.mm.ss dd.mm.yy
^
Cursor
Introducir hora y la fecha
Figure 62 Display Time and Date
Estado de la central
Lev 2: MODIFICAR
Control Panel
FC500