Getting To Know Your Griddle; Temperature Control Probe; Before Using For The First Time - Bella 14606 Manual De Instrucciones

Getting to Know Your Griddle

Product may vary slightly from illustrations
Figure 1
Detachable
Temperature Dial
Pull out drip tray

Temperature Control Probe

1. The temperature control probe is the nerve center and brain of the electric Griddle. Treat it carefully.
Dropping or banging it could change its calibration and make the temperature settings inaccurate.
2. Rotate the dial to select the temperature as called for in the recipe.
3. The indicator light on the temperature control probe will illuminate as soon as the dial is rotated.
The light will go out once the selected temperature has been reached.
4. Allow the Griddle to cool before removing the temperature control probe.
5. To clean the temperature control probe, simply wipe down with a soft, damp cloth.
Make sure you dry it thoroughly before using again.
NOTE: The temperature control probe is not submersible.
CAUTION: Use the temperature control probe supplied with this Griddle only.
The use of any other temperature control probe may cause fire, electric shock, or injury.

Before Using for the First Time

1. Carefully unpack the Griddle and remove all packaging materials.
2. Place the non-stick Griddle on a clean, flat working surface.
NOTE: Some countertop and table surfaces, such as Corian
withstand the prolonged heat generated by this Griddle. We recommend placing a hot pad or trivet
under the Griddle beforehand to avoid possible damage to the surface. Be sure the sides and back
of the Griddle are at least 4 inches away from any walls, cabinets, or objects on the counter or table.
3. Before first use, see Hints For Care and Use of Non-Stick Surface and Care & Cleaning Instructions
sections of this Instruction Manual.
4. Before cooking in the Griddle for the first time, wash the non-stick Griddle in mild dishwashing
soap, wipe and allow to dry.
NOTE: THE GRIDDLE IS NOT DISHWASHER SAFE.
5. Insert drip tray into rails under the Griddle's side, positioned directly under the grease drain.
6. Turn the temperature control knob on probe to OFF position and attach securely in place.
7. Coat the non-stick surface with vegetable shortening before heating. If necessary, remove excess
oil with paper towel.
SO-312582_14535_14447_BELLA Ceramic Griddle 105 x 20 IM_R10b.indd 4
and other surfaces, are not designed to
®
4
2016-07-29 11:43 AM