Alarm Setting; Radio Function - Daewoo DCR-450 Manual De Instrucciones

EN
TIME SET UP
When it is turned o , press and hold time set up button (8) to start setting, the LED display will
twinkle, set the hour with pressing previous (5) and minute with next (11) button, then press
time set up (8) short time to con rm the setting.
Note: you can switch the time numeration between 12 and 24 with fast double clicking time
set up (8).

ALARM SETTING

1. When it is turned o , quick press AL1 (3) to set alarm, LED will display "OFF"/"BB"/"FM", you
can switch ringtone of between "BB" and FM radio, after blinking three times, it is defaulted as
selected.
2. After ringtone selected, if you have selected "BB" alarm press and hold AL1(3) to set the time
you would like to set the alarm, set hour and minute with quick press of Previous (5) and next
(11), and then press AL1(3) again to complete alarm setting, the Alarm 1 indicator will light up
and be solid.
2. If you have selected FM radio as ringtone, before the LED twinkle three times, quick press
station selection button (8) to select the station which you would like to use as ringtone, then
set the hour and minute same way, after that, the "V00" on the LED will twinkle, you can set the
volume level by pressing V- (4) or V+ (10), nally press AL1 (3) again to complete alarm setting;
3. Set the Alarm 2 same way as Alarm 1.
4. Quick press Alarm 1 (3), and select "OFF", and wait the "OFF" twinkled three times to turn o
Alarm 1, and the indicator will light o . Turn o Alarm 2 in the same way.
Note: When it is ringing, if you want to snooze, press SNOOZE (6) to pause and it will ring again
10 minutes later. You can also press any other buttons to stop it. If you have not press any
button after its ringing, it will stop ringing 60 minutes later.

RADIO FUNCTION

Turn on the unit. Press the Mode button (7) to change the radio play mode between FM and
AM. In radio mode, press the previous (5) or Next (11) buttons once to manually select the
desired station or continuously press the previous (5) or Next (11) buttons to automatically tune
to the next available station.
Press the SCAN (1) button once to automatically search and save radio stations (the system
allows you to save 30 stations) and then press the time/TUN + (8) Station selection button to
select one of the 30 saved stations.
You can also manually modify or save the desired radio stations: Locate the desired station
with the previous (5) or Next (11) buttons, press and hold the TIME/TUN + (8) button until the
display ashes showing Pxx (P01, P02,... P30), you can select the memory where you want to
save the station by pressing the previous (5) or next (11) keys and press TIME/TUN + (8) again
to con rm.
If you want to switch to AM mode, brie y press the Power/Mode button (7), the rest of
Operations work the same way as in FM mode.
Remember that you may need to move the clock-radio to improve reception in the AM mode.
SLEEP SETTING
Turn the radio on and press Snooze/Sleep (6) short time to set up the Sleep period from 10 to
90 minutes.
10