System Requirements - i-tec U3HUBMETAL402 Manual De Instrucciones

Ocultar thumbs

Contenido

página de 32

/ 32
Contenido
Tabla de contenido
Marcadores

Tabla de contenido

Idiomas disponibles

INTRODUCTION

i-tec USB 3.0 Metal HUB will immediately catch your attention thanks to its

elegant metallic design. It is an ideal companion for everybody who does

not have enough USB ports in his/her notebook, ultrabook or PC and who

has to constantly connect and disconnect his/her favorite USB equipment

such as ﬂash disks, mobile phones, tablets, digital cameras, MP3 players,

printers, etc.

This HUB offers four USB 3.0 ports with the Plug & Play function. One of the

advantages is that thanks to their placement you have enough space even

for connection of large pieces of equipment. The USB 3.0 interface is

important mainly for data transfers from USB 3.0 memory cards and ﬂash

disks which will use its high transfer speed most.

This HUB is powered from the USB bus and does not require installation

of drivers. You will just connect it by the USB cable to your computer and

immediately you can start using it. This HUB has a built in overcurrent

protection of your computer in case of short connection on the peripheries.

The interface is compatible with USB 2.0 / 1.1. This HUB is delivered without

the power adapter which for most hardware equipment is not necessary.

Thanks to its compact dimensions and low weight it is an ideal companion

to your notebook when traveling.

INSTALLATION IN WINDOWS 7/8/8.1/10, MAC OS X AND HIGHER

The HUB is installed automatically, no need install drivers. Plug the HUB

via USB cable into available USB port (USB 3.0, 2.0 or 1.1 standard) of

your notebook / PC and follow the on-screen instructions. The HUB will be

installed and displayed in Device manager as "Generic USB HUB" and "USB

3.0 HUB".