Team Talk Function; Voice Projection Unit (Vpu); Long Range Radio Transmission (Ptt); Adjusting The Volume - INTERSPIRO Spirocom XXL BT Manual De Usuario

Bluetooth® notifications
• If an established Bluetooth® connection gets disconnected the Spirocom
plays 3 single tones of a decreasing pitch in the ear speaker to indicate that
the connection has been lost.
• If the connection is re-established the Spirocom plays 3 single tones of an
increasing pitch.

Team Talk function

• The Spirocom is started with the last used group number.
• To Change the group number push the Adjustment button up or down. The
group number can be changed until the Spirocom has connected to a group
• When the Spirocom connects to a group "connected" is heard in the ear
speaker and the group number remains lit in the display.
• If the group number must be changed after the Spirocom has been
connected to a group it needs to be restarted.

Voice projection unit (VPU)

If the unit is configured with VPU toggle function it starts by default in the mode
for Team Talk only. By quickly pressing and releasing the MODE button the unit
toggles between "Team Talk only, no VPU"<---->"VPU only, no Team Talk".

Long range radio transmission (PTT)

1. Lift and hold the PTT button to start a transmission.
2. Wait until the LED indicator shows a red light and a beep is heard in the
ear speaker - now you can speak.
3. Release the PTT button to end the transmission.

Adjusting the volume

• The volume in the ear speaker can be adjusted after the Spirocom has
connected to a group.
• There are 5 volume levels and the default level is 3 (medium)
• Push the Adjustment button up or down to change the volume, each step is
indicated with a beep in the ear speaker. The lowest and highes level are
indicated with a double beep.
Spirocom XXL BT
23