Display And Buttons - Audio Pro LIVING LV3 Manual Del Propietário

PLAY WIRELESS FROM ANY OTHER SOUND SOURCE
The TX100 transmitter has a sound input on its side to connect to a 3.5mm stereo cable. You can
connect any device with sound output/headphones to the transmitter. Computer, mp3-player, iPod/
iPhone/iPad dock, cellphone, stereo/receiver, cd-player, radio, etc. TX100 contains an advanced
Burr-Brown A/D converter for best sound reproduction. The transmitter TX100 must be powered by
Audio Pro USB power adaptor if connected by cable (sold separately).
Connect all devices with sound output/headphones.
Examples:
iPod/iPhone/iPad dock
Cellphone
CD-player
Network player
Stereo/receiver
TV

DISPLAY AND BUTTONS

On the front of LV3 you find display and IR-eye for remote control.
- To use remote, aim at IR-eye.
(Only speaker set to RIGHT or MONO Master can be used via remote.)
- The displays shows: volume level, chosen channel (House Code), chosen
zone, and mute (–).
Note: Display only shows information for 3 seconds after setting (on buttons or with
remote). Then it is turned off.
Beneath the grille on LV3 top is LED status indicator, buttons for
volume, button for House Code selection, button for Zone selection.
1. Volume, + to increase, – to decrease.
2. House Code (channel), one push displays chosen channel (1, 2, 3).
Further pushes changes channel 1>2>3 and back to 1.
3. Zone, one push displays chosen volume zone (A, B, C).
Further pushes changes channel A>B>C and back to A.