System Requirements - i-tec U3CLONEDOCK Manual De Instrucciones

EN
INTRODUCTION
i-tec USB 3.0 SATA HDD Docking Station is used for connecting up to
two 2.5" or 3.5" SATA I/II/III HDD without using a USB box. Thanks to
the USB 3.0 connection and SATA III data interface you can use high
transfer speeds up to 5 Gbps.
SPECIFICATION
• USB 3.0 interface, compatible with USB 2.0
• Maximum transfer speed: 5 Gbps via USB 3.0, 480 Mbps via USB
2.0; the actual speed depends on the HDD properties
• Supported HDD: 2.5"/3.5" HDD not exceeding the width of a
standard 3.5" HDD with data interface SATA I/II/III up to 6TB
• LED indication: for power and inserting of HDD, blue for 25%/
50%/ 75%/ 100% of cloning and HDD activity
• Plug & Play functions
• OS: Windows 7 32/64bit, 8 32/64bit, 8.1 32/64bit, 10 32/64bit,
macOS 10.4 and higher, Linux 2.6.24
• Operating temperature: 5°C - 50°C
• Dimensions: 153 x 111 x 62mm
• Weight: 390 g

SYSTEM REQUIREMENTS

Hardware requirements: PC or a notebook with Intel Pentium 2 and
higher CPU, macPC / notebook with Apple G3 and higher CPU with
a free USB 3.0 port. For connecting you can also use a USB 2.0 port;
however, the transfer speed will be lower.
Operating system: Windows 7 32/64bit, 8 32/64bit, 8.1 32/64bit, 10
32/64bit, macOS 10.4 and higher, Linux 2.6.24
CONTENTS
• i-tec USB 3.0 SATA HDD Docking Station
• USB 3.0 cable (80 cm)
• Power adaptor (input: AC 100-230V, 50-60Hz, max. 1.2A; output:
DC 12V / 3A)
• User manual
6
Quick Start / USB 3.0 SATA HDD Docking Station