Adjusting The Playback-Speed; Cueing - Omnitronic CMP-1000 Manual Del Usuario

If the CD-player is in play-mode and you turn the encoder, the player jumps to track 2 and immediately
starts playback.
(2) If you press and turn the control at the same time, you can select the folders of CDs with titles in MP3
format. Tracks and folders are indicated on the display. By pressing the control, you can switch the
display from track name to folder name.

6.6 Adjusting the playback-speed

You can synchronize the CD player and another signal-source while cueing with the headphones via your
mixer.
MAIN TEMPO
With the change of speed, the pitch is also changed proportionally. Press the MAIN TEMPO-button and the
pitch will remain constant.
PITCHFADER
Via the Pitchfader, you can adjust the playback-speed by up to +/-100 % (MP3s up to +/-16 %).
(1) Put the CD-player into playback-mode. Press the PITCH ON/OFF-button to activate the Pitchfader (LED
on).
(2) Select the speed-adjustment range by pressing the 4/8/16%-button (LED on)
(3) Adjust the playback speed via the Pitchfader. The display shows the percentage deviation from the
standard speed.
JOG-WHEEL
In playback-mode, you can adjust the playback-speed by +/-10 %.
PITCH-BEND BUTTONS
With the Pitch Bend-buttons you can synchronize the beats of two music pieces.
(1) Put the CD-player into playback-mode. Activate the Pitch function and the AUTO BPM mode to adjust
the same number of beats for both titles with the Pitchfader.
(2) Now synchronize the two beats with the Pitch Bend-buttons. As long as the „+" or „-„ button is pressed,
the title is played 16% faster or slower. After releasing the Pitch Bend-buttons, the player automatically
returns to the original playback-speed.

6.7 Cueing

AUTO-CUE FUNCTION
After switching on and after turning the Track-Encoder, the player automatically jumps to the section where
the music starts. This function enables to minimize the transitions between two tracks.
If the Auto Cue function is disabled, a time interval remains between two tracks until the music starts. If the
Auto Cue function is activated (the display shows "Auto Cue"), the music starts immediately. Keep the
SGL/CTN-button pressed for one second to deactivate Auto Cue.
BACK-CUE FUNCTION
If you press the Cue-button during playback, the player returns to the track-start or Cue-point (In-button) and
goes into Pause-mode. Please note that this function is only available within one track.
BOP FUNCTION
If you press the BOP-button during playback, the player returns to the track-start or Cue-point and starts
remains in play-mode.
MEMORIZING A CUE-POINT
(1) In playback-mode, press the Play/Pause-button at the spot where the CD player is to return later. The
Cue-indicator shortly flashes. As soon as you press the Cue-button, the player returns the Cue-point and
goes into Pause-mode.
(2) If you press the IN-button during playback, the Cue-point is set and the Cue-indicator shortly flashes.
(3) By pressing a Track-button, the Cue-point is set and the Cue-indicator shortly flashes.
(4) To precisely select a desired spot to 1 FRAME (1/75), turn the jog -wheel in pause-mode and press the
IN-button to set the Cue-point. The Cue-indicator shortly flashes.
31/63 10602405_V_1_0.DOC