Settings; Control Lock; Remote Start - LG SIGNATURE LUWM101HWA Manual Del Propietário

Settings

Swipe down the display to open the Settings screen.
Touch More Settings to reveal the entire Settings
menu.

Control Lock

This option disables the controls and can prevent
children from changing cycles or operating the
machine. The feature does not lock the door. Once
the Control Lock is set, it must be deactivated before
any controls, except the Power button and Switching
between Main Washer and Mini Washer, can be
used. Once the washer has shut off, the Power
button will allow the machine to be turned on, but the
controls will still be locked.
Locking the Control Panel
Press Control Lock in the Settings screen to turn
Control Lock on or off.
NOTE
• Turning off the power will not reset the Control Lock
function. You must deactivate Control Lock before
you can access any other functions.
• When Control Lock is turned on, the Wi-Fi icon on
the display window is changed to the Control Lock
icon.
• When Control Lock is turned on, you cannot operate
any buttons except the Power button, the Settings
drop down button, and the button to switch between
the Main Washer and Mini Washer.
Unlocking the Control Panel
Press Control Lock in the Settings screen to turn
Control Lock on or off.
Wi-Fi
Setup the Wi-fi connection. When Wi-Fi is turned on,
the Wi-Fi icon appears in the display.

Remote Start

Use a smart phone to control the appliance remotely
or check to see how much time is left in the cycle.
NOTE
• You must first connect to a gateway and register the
appliance in order to use the Remote Start function.
See the Smart Functions section for more details.
Using Remote Start
1
Press the Power button.
2
Load the laundry.
3
Swipe down from the top of the display to open
the Settings screen and press More Settings.
Press Remote Start in the Settings menu.
4
Start a cycle from the LG Smart ThinQ
application on your smart phone.
NOTE
• Once the Remote Start mode is enabled, you can
start a cycle from the LG Smart ThinQ smartphone
application. If the cycle is not started, the machine
will wait to start the cycle until it is turned off
remotely from the application or the Remote Start
mode is disabled.
• When Remote Start is turned on, the door is
automatically locked.
Disabling Remote Start
To disable Remote Start, turn it off in the Settings
screen.
NOTE
• Remote Start will not start if the door is open.
OPERATION 35