To Page The Handset; To Lock The Keypad; Using Your Cordless On A Pabx; Redial - BRONDI BRAVO CORDLESS 2 Manual De Instrucciones

This function is useful if you can't fi nd your handset.
• On the base unit press and release the
• To stop the handset ringing, on the handset press any button or numbered key.
To lock the handste's keypad so that no buttons can be pressed.
• To block the handset keypad, while handset is idle press
until you hear a confi rmation beep and
• To unlock the keypad, press
PAUSE FUNCTION
If you have a PABX connection you need to pause for a few seconds between dialing the
system code and the actual phone number. To pause, press the
appear on the display.
This is the fl ash key, press it during the line is engaged to send the fl ash signal.
• To turn the ringer temporarily off, when the handset is idle press and hold for a few seconds
the button, the symbol
• To turn the ringer back on, press and hold again the button
from the display.
IMPORTANT: with this function active only the base rings when receiving a call, while the handset
onluy shows a symbol on the display.
BRAVO CORDLESS-2-lingue

6.11 TO PAGE THE HANDSET

button. The handset rings with a special tone.

6.12 TO LOCK THE KEYPAD

appears on the display.
, again and hold it until

6.13 USING YOUR CORDLESS ON A PABX

6.14 REDIAL

6.15 TURNING RINGER TEMPORARILY OFF

will appear on the display.
13
13
and hold it for a few seconds;
disappears from the display.
button and a dash "-" will
, the symbol will disappear
6-09-2005, 16:02