Default Values; Lte; Language; Pin:0 - FTE Maximal Nebula 8S Manual Del Usuario

Default values

The "Defaults" screen is used to load the factory settings of the amplifier. Pressing OK
displays a confirmation screen. Once confirmed, it deletes the current configuration to restore
the factory settings.
Press to access the next screen.

LTE

From this screen the frequency of the LTE filter and then the frequency band of the UHF
inputs are configured.
Press OK to edit and the
- 700: UHF band is CH21 – CH48
- 800: UHF band is CH21 – CH60. This is the default option.
Once selected, press OK to confirm.
Press to access the next screen.

Language

In the "Lang" screen you can select the language of the amplifier menus.
Press OK to edit and the
- Eng: English
- Spa: Spanish
Once selected, press OK to confirm.
Press to access the next screen.
PIN
Here you can enable or disable a password or PIN in order to access to the headend
programming. By default it is set (off). To activate it follow these steps:
- Press OK and change the PIN to (on)
- The amplifier will ask you to enter the 4-digit PIN. Use the
value of each digit and the OK key to confirm it.
The PIN will be requested from the moment the Nebula comes back from sleep mode.
Press to return to the first screen of CONFIG submenu or ESC to go back to the main
menu.

3.3 FM menu

From this menu you can adjust the settings of the FM signal. There are 2 options:
- Amp: to activate or deactivate the first amplifier stage.
- Gain: Gain regulation adjustment.

FM AMP

This screen allows activating (on) or deactivating (off) the first amplifier stage for the FM
band.. This option is set (off) by default.
In order to activate (on) or deactivate (off) press OK to edit and
press OK to confirm.
Press to access the FM GAIN screen.

FM GAIN

Here you can adjust the gain regulation of FM band, from 0 to 20 dB.
Press OK to edit the value and
Press to return to the FM AMP screen or ESC to go back to the main menu.
Reserved for technical modifications and/or errors
User's manual · Nebula
keys to change the value. The options are:
keys to change the value. Available options:
keys to change. Then press OK to confirm.
keys to change the
keys to change. Then
12
- -
CONFIG^
Defaults
CONFIG^
LTE 800
CONFIG^
Lang:eng
CONFIG^
PIN off
CONFIG^

PIN:0---

FM
Amp off
FM
Gain 16
Nebula Version en_1.2 FTE maximal