Stainless Steel - GE ZET1P Manual Del Propietário

Inside of the door:
To clean
the door
• Because the area inside the gasket is cleaned
• The area outside the gasket can be cleaned
• Do not rub or clean the door gasket—
Outside of the door:
• Depending on your model, see the Stainless
Do not use a steel-wool pad; it will scratch the

Stainless steel

surface.
surfaces (on
To clean the stainless steel surface, use
some models)
warm sudsy water or a stainless steel cleaner or
polish. Always wipe the surface in the direction
of the grain. Follow the cleaner instructions for
cleaning the stainless steel surface.
Painted Painted surfaces include the door, top
of the control panel and the drawer front.
surfaces (on
Clean these with soap and water or a vinegar
some
and water solution.
models)
during the self-clean cycle, you do not need to
clean this by hand. Any soap left on the liner
causes additional stains when the oven is
heated, so be sure to rinse thoroughly.
with a soap-filled scouring pad.
the fiberglass material of the gasket has an
extremely low resistance to abrasion. An intact
and well-fitting oven door gasket is essential
for energy-efficient oven operation and good
baking results. If you notice the gasket
becoming worn, frayed or damaged in
any way or if it has become displaced on
the oven, you should have it replaced.
steel surfaces section or the Painted surfaces
section.
Care and Cleaning
Wall Oven
To inquire about purchasing stainless steel
appliance cleaner or polish, or to find the
location of a dealer nearest you, please call our
toll-free number, 800.626.2002 or visit ge.com.
Do not use commercial oven cleaners, cleaning
powders, steel wool or harsh abrasives on any
painted surface.
37