Important Remark; Warnings; Introduction; Models - Ecler AWAK Serie Manual De Instrucciones

1. IMPORTANT REMARK

Congratulations! You are the owner of a carefully designed and manufactured equipment.
We thank you for trusting in us and choosing our AWAK Series loudspeaker cabinets.
In order to get the optimum operation and efficiency from this unit, it is VERY IMPORTANT
- before you plug anything - to read this manual very carefully and bear in mind all considerations
specified within it. We strongly recommend that its maintenance be carried out by our Authorised
Technical services.

2. WARNINGS

No user serviceable parts exist inside these units.
Never use this unit in the proximity of water. Do not expose the unit to water splashing, nor
place liquid containers on top of it.
Avoid placing the unit next to heat sources such as spotlights or heaters.
Use only the accessories specified by the manufacturer. The units must never be flown
from their transportation handles. Use the correct accessories for each application.

3. INTRODUCTION

These acoustic enclosures have been designed to offer a wide range of applications:
Starting with conference rooms where superior intelligibility is required or outdoor installations like
mobile discos. These situations require an excellent sound projection, large sound pressure and
operating safety. All models employ bass-reflex type acoustic enclosures and have been optimised
using the acoustic design software SIMBOX.
High density wood fibres have been used in the fabrication process. All models feature a
1mm thick perforated grating and acoustically transparent foam, effectively protecting the unit from
splashings and dust. The LC-type passive filters inside the AWAK series make use of low tolerance
polyester capacitors and large section coils. All units feature an effective protection system on the
high frequency way against Larsen effect and signal clipping. The connection plates are equipped
with speak-on connectors.

4. MODELS

AWAK108i
Employs an 8" high performance bass driver with polypropylene membrane, capable of
holding up to large cone displacements. This 8" driver is firmly mounted on a steel chassis and
features a powerful ceramic magnet and a 52 mm coil. A 1" tweeter provides the high frequencies.
AWAK208i
Employs two 8" high performance bass driver with polypropylene membrane, capable of
holding up to large cone displacements. This 8" driver is firmly mounted on a steel chassis and
features a powerful ceramic magnet and a 52 mm coil. The high frequency way uses 1" high
efficiency compression driver coupled to a 90ºx60º rotatable horn (See diagram).
4