Reverberation And Reverberation Time; Reverberation; Reverberation Time Rt - Ecler CKL/T Serie Manual De Instrucciones

8.2. Reverberation and reverberation time

8.2.1. Reverberation

When a sound is generated inside a closed space, all room surfaces produce a series of reflections. The
magnitude of these reflections fades out more or less quickly as time passes.
The speed of this sound decay depends on the absorption characteristics of the room surfaces. The
higher the absorption, the quicker the attenuation. The amount of decaying sound once the sound
source has stopped emitting is called reverberation.
Example of sound pressure decay as a function of time.
A room with large amounts of reverberation is also called a "live" room (factory plant, church, sports
arena, etc.), as opposed to an acoustically "dead" or "dry" room, where the decay of the reverberation is
much quicker. (recording studio, voice booth, etc.)
The parameter that quantifies the amount of reverberation inside a closed space is known as
reverberation time, commonly expressed as RT

8.2.2. Reverberation time RT

The RT is defined as the time necessary for the sound pressure to decay 60dB below the initial
60
pressure level before the sound source stopped emitting.
Generally speaking, the RT
part caused by the higher absorption coefficient at high frequencies of commonly employed acoustic
treatments. Air absorption and low relative humidity are also responsible for this effect, but are especially
important in very large spaces.
As just mentioned, RT
reverberation times at 500Hz and 2kHz, RT
reverberation of a room.
60
varies with frequency, tending to be shorter as frequency rises. This is in
60
is a function of frequency, but often one single value (the average of
60
.
60
) is given as a reference for characterizing the
mid
13