Sony XAV-W1 Manual De Instrucciones página 43

No Signal Setting
Shows the wallpaper
automatically when no
external video signal is
detected.
External Video Setting
Item
Input (page 49)
Activates the video input from
the connected back camera/
navigation device.
Color System (page 49)
Changes the color system
according to the connected
back camera/navigation
device.
(SECAM is not supported.)
Back Camera Setting
(page 50)
* When a device is connected to BUS CONTROL IN, "Sony BUS" appears instead of "AUX 3," and only options
"Video" and "Audio" are selectable.
Wallpaper (z) To show the wallpaper
automatically.
Blank Screen
To show the no signal
(blank) screen.
Option Purpose
OFF (z) To deactivate the input.
Navigation To show the picture from
the navigation and output
the sound from the current
source.
Back Camera
To show the picture from
the back camera when the
back lamp lights up (or the
shift lever is set to the R
(reverse) position).
PAL (z: Asian
To set to PAL.
model)
NTSC
To set to NTSC.
(z: Latin
American
model)
– –
Unit off.
Unit status
Any status.
43