KETRON Audya Series Manual Del Usuario página 187

NRPN NRPN Data MSB Default
MSB LSB
96 17 0...23
96 18 0...11,
12...23,
24...35,
36...47,
48...59,
60...71,
72...83,
84...95,
96...107,
108...119
96 19 0, 1
Parameter
value
23 Virtual voice presets: presets for Virtual voice feature. Calling a preset
overwrites the current Voice transform (vibrato, formant, tone...) and
EQ parameters of the lead voice. Calling a preset also turns "Lead
channel processing switch" (NRPN 96-06) on automatically. Presets
are:
0 -Pop 1 -Mellow
2 -Teen pop
3 -Soft air
4 -Dark
5 -Energy 6 -Delicate
7 -Opera 8 -Crooner
9 -Light 10 -Tremolo
11 -Vibrato
12 -Breathy 13 -Shaky 14 -Phone
15 -Angel
16 -Alien
17 -Cartoon
18 -Nasal
19 -Strange 20 -Deep
21 -Girl
22 -Drunk
23 -default
none Auto-Chord presets: preset tables for Auto-Chord mode (NRPN 96-
01 data 07). These preset tables are uploaded by the user through a
sysex message (sysex ID=1), so you must send such a sysex at least
once before using this NRPN. Please refer to the sysex section for
more information regarding the content of the preset tables and how
to upload them into Voicetron.
This NRPN builds a harmony table from a root and one of the 10
stored preset tables. The NRPN value is formatted as follows: Value =
12 * Table number + Root Table number ranges from 0 to 9 and Root
from C=0 to B=11.
For instance, if you have uploaded the following harmonies in the
preset tables: Major, Minor, Major 7th, Minor 7th, ... you can then get a
D minor harmony by sending a NRPN value of:
12 * Minor + D = 12 * 1 + 2 = 14.
To get an Am7 chord, you will have to send:
12 * Minor 7th + A = 12 * 3 + 9 = 45
Note: if you've downloaded a custom harmony table (using a Sysex
0), calling this NRPN will overwrite it.
0 Vocalizer output: 0 = Main, 1 = Aux
MIDI Implementation
KETRON • AUDYA
187