Purpose Of This Manual - Tempo MM200 Manual De Instrucciones

Description
The Tempo MM200 Digital Multimeter is a hand-held testing devices with the
following measurement capabilities: AC and DC voltage, AC and DC current,
frequency, and resistance. They also check diodes and verify continuity. Other
specialized capabilities and functions common to all meters include:
• Backlit LCD for reading in dim conditions.
• Beep-Jack™ audible warning alerts the user with a beep and an error message
on the LCD if the test lead is plugged into the mA/μA or A input terminal while the
selector switch is not in
the mA/μA or A position.
• Non-contact and single-probe voltage detection capability.
• Bar graph display, which responds more quickly than the numeric display —
useful for detecting faulty contacts, potentiometer clicks, and signal spikes.
• Relative zero mode.
• Data hold mode.
• Selectable automatic power off.
Safety
Safety is essential in the use and maintenance of Tempo tools and equipment. This
instruction manual and any markings on the tool provide information for avoiding
hazards and unsafe practices related to the use of this tool. Observe all of the
safety information provided.

Purpose of This Manual

This instruction manual is intended to familiarize all personnel with the safe
operation and maintenance procedures for the Tempo MM200 Digital Multimeter.
Keep this manual available to all personnel. Replacement manuals are available
upon request at no charge at www.TempoCom.com.
Do not discard this product or throw away!
For recycling information, go to www.TempoCom.com.
2