Anti-Tip Bracket Installation - Premium PRE2015GW Manual De Instrucciones

 ANTI-TIP BRACKET INSALLATION
To reduce the risk of tipping the range by abnormal usage or improper door loading, the range must
be secured by properly installing the anti-tip device packed with the appliance.

Place the anti-tip bracket on the floor as shown figure. Anti-tip bracket can be installed on either
right or left side.

Make the locations of 2 holes of ant-tip bracket on the floor.

Use a 5/16" masonry drill bit and insert plastic anchor.

Secure bracket to floor using screws supplied.

Slide appliance into position.
NOTE: If range is relocated, the bracket must be removed and installed in new location.
14