User Servicing Instructions - Lorell LLR00074 Manual De Instrucciones

USER SERVICING INSTRUCTIONS

a) Grasp plug and remove from the receptacle or
other outlet device. Do not unplug by
pulling on cord.
b) Open fuse cover. Slide open fuse access cover
on top of attachment plug towards blades.
c) Remove fuse carefully. Push the fuse from the
other side or turn fuse holder over
to remove fuse.
d) Risk of fire. Replace fuse only with 2.5 Amp, 125 Volt fuse.
e) Close fuse cover. Slide closed the fuse access cover on top of attachment plug.
f) Risk of fire. Do not replace attachment plug. Contains a safety device (fuse) that
should not be removed. Discard product if the attachment plug is damaged.
Notice:
1. When you replace the fuse, please don't operate suddenly or overexert, or else
the product will be damage or cause accident.
2. When you feel it hard to be operated, please make sure you have got
the right way.
CLEANING
1. Be sure to unplug from the electrical supply source before cleaning.
2. Plastic parts should be cleaned with mild soap and a damp cloth or sponge.
Thoroughly to remove soap film with clean water.
3. Be sure not to make water or other liquid enter inside of motor.
7