INSTALLATION INSTRUCTIONS
Composition of flush-mounting boxes
The flush-mounting boxes can be used individually or combined together to create
front door units including more than 3 modules. The boxes are joined together using
the spacers provided in the box pack, which guarantee the correct distance between
the boxes and their alignment, making it possible to apply the plates.
The spacer is perforated
to permit the passage of
the multi-pole connection
cables necessary for
connecting the modules to-
gether that are not installed
in the same box.
Fixing the flush-mounting box
Box fixing and composition
41
The flush-mounting boxes must be built
into the wall paying attention that the
arrow printed inside is facing upwards.
When installing them, leave the mortar
guard protections that cover the zones
for the fixing screws and elastic hinge.
These protections will be removed
later when installing the frames and
modules.