Closing The Frame; Directing The Telecamera - Chorus Gewiss GW 18 301 Manual De Instrucciones

INSTALLATION INSTRUCTIONS


Closing the frame

When configuration is complete, close the front door unit, fixing the frame to its box
using the two provided screws.

Directing the telecamera

To direct the telecamera so that it correctly frames the call zone, proceed as follows:
1. Remove the module frame, using a small flat point screwdriver to apply slight
pressure on the 4 spring catches. Carefully set aside the frame and the transpa-
rent name holder plate, if applicable.
2. Adjust the direction of the telecamera (swivelling in height and direction) using
the friction swivel mechanism (height and direction) located to the right of the
lens. To facilitate the operation, insert a screwdriver in the cross slot in the
mechanism.
ATTENTION: Do not turn the mechanism, but move it only up-down
or left-right. Do not force the mechanism beyond its stopping points.
Completion
2
1
56