Tabla de contenido
Publicidad
TROUBLESHOOTING
PROBLEM
No lights are on.
All elōs energy setting
buttons on the base
are blinking
(HIGH-MEDIUM-LOW).
elōs activation button
on the applicator is
blinking.
Error light is on.
TROUBLESHOOTING
32
POSSIBLE CAUSE
1.
Power cable is not connected.
1.
No elōs energy level was
selected.
1.
elōs energy level was selected
but elōs activation button was
not pressed yet.
1.
Need to reset the system.
SOLUTION
1.
Connect power cable.
1.
Select an elōs level.
1.
Press the elōs activation
button. The applicator fan
will start blowing indicating
that the elōs cartridge is
active.
Reset the system by turn-
1.
ing it off and on again.
2.
If problem persists, discon-
nect power cord and
wait until all lights are off
(several seconds). Then
reconnect the power cord
and turn on the system.
3.
If error light is still on, try
moving to a cooler area
with a room temperature
of less than 30°C/86°F and
restart the system.
Publicidad
Tabla de contenido
