Teac NP-H750 Manual Del Usuario página 51

3
Press the scroll buttons (k/j) to set the
minute value, and press the ENTER button.
"Off Time" appears on the display, and the "hour" value
blinks.
4
Repeat step and
2
"Source Select" appears on the display.
5
Press the scroll buttons (k/j) to select the
source, and press the ENTER button.
This completes setting the clock time used for the timer.
Next, you must activate the timer. Follow the proce-
dures in the next sections.
p USB playback is not possible. Only iPod/iPhone/iPad
playback is possible.
p AirPlay cannot be used with the wake-up timer.
or
e
to set the Off time.
3
e
Changing the timer mode
Press the remote control's TIMER button to cycle through
timer modes as follows.
Timer O
Timer Daily
Timer Once
Setting the timer (daily or once)
At the set On Time, the unit will turn on and start playback
(every day or once). At the set Off Time, the unit will enter
standby.
1
Set the timer on and off times (page 50).
2
Select "Timer Daily" or "Timer Once" by
pressing the TIMER button on the remote
control unit.
The timer indicator " " lights on the display.
p When in standby, power consumption is less than
0.5 W, so " " will not be shown.
Continued on the next page
51 51
e